How to extend your Wireless Network by building a 2.4 gHz wifi cantenna - How to extend your Wireless Network by building a 2.4 gHz wifi cantenna P. 4
| Networking - WiFi - Wireless |
Page 4 of 5
Attach the 4" vent clamp snugly to the end. This forms the tube into a circle. Then mark the aluminum along the outside of the clamp.
Secure the plate with duct tape. Then place the 4 inch clamp over the duct tape to secure it.
Cut 4 vertical slots in the 4 inch end of the 4" to 6" adapter. Slide the dryer vent tube INSIDE the adapter, and secure it with another 4 inch clamp.
Your wifi cantenna is now ready for use. Enjoy!
